automation of an incinerator with fume cleaner
St.Moritz - Switzerland

COMPANY:

INSTALLATION YEAR: 2005

BRU.IMPIANTI Group provided this incineration system with:

• a Switch Cupboard
• an Automatic Control Program running on a PLC S7 - 300; all of inverters are connected to the PLC by a profibus net.
• a Supervision Program (in Visual C# language - edited with Microsoft Visual Studio.NET) with graphic interface running on a PC (with Windows XP operating system) that is connected to the PLC by a NetLink -MPI cable.
  Supervision program allows the operator to:
     - monitor plant working
     - set working parameters (i.e. desired temperature values)
     - give commands (turn to automatic or to manual mode, etc.. )
     - print graphics about plant working;
       the operator can either give direct print command
       or enable automatic daily printing.
  This program also shows proper advertising messages if there are some alarms, and it stores into a proper archive several data about plant working.
  
• two PUSH-BUTTON panels to enter manual commands
• a Visual C# program for graphic analysis and printing of stored measures and other working data
• Trouble shooting service under remote control by modem.
  Remote connection makes also possible to modify either supervision program and control program into the PLC.

Graphic page of data analysis program

Full plant page of supervision program

Incinerator page of supervision program