You searched for installations in the category 'Control of processes', in the world.
We have found 13 installations.
Page 1 of 2
Full view of the post-combustor
1 / 7
Detail of the burner of the post-combustor
2 / 7
Internal detail of the post-combustor
3 / 7
Three-dimensional drawing of the post-combustor
4 / 7
Supervision software – main monitoring window
5 / 7
Supervision software – graphics window
6 / 7
Supervision software – setting window (working parameters of the fans)
7 / 7
Brazil
Category: Automation, Control of processes
Post-combustion system which has been installed in a felt production factory; its purpose is both heating the drying chamber and thermally treating the polluted process air
Outside view - Filter side
1 / 9
Outside view - Flour mixer and combustion chamber side
2 / 9
Safety chimney and boiler
3 / 9
Flour mixer and combustion chamber
4 / 9
Rendering
5 / 9
Rendering
6 / 9
Main monitoring window of the supervision software
7 / 9
Window which allows to set the automatic timed start of heating for any day of the week
8 / 9
Graphic window
9 / 9
Greece
Category: Automation, Control of processes
Disposal system for animal flours (slaughtering residues)
Italy
Category: Automation, Control of processes
Disposal system for stearic acid with heat recovery as diathermic oil
Post-combustion chamber with gas piping and chimney
1 / 7
Rotating combustion chamber
2 / 7
Loading conveyors for the animal flours to be disposed
3 / 7
Rendering No 1
4 / 7
Rendering No 2
5 / 7
Main monitoring page of the supervision program
6 / 7
Graphic page of the program for the analysis of the working data
7 / 7
Italy
Category: Automation, Control of processes
Disposal system for animal flours with heat recovery by diathermic oil, with rotating combustion chamber
Transport chain with the painted pieces and inlet/outlet side of the polymerization oven
1 / 8
Loading/unloading zone for the pieces to be painted
2 / 8
Side of the drying oven with recycling fans and side of the pre-treatment tunnel
3 / 8
Aerial transport chain with the pending pieces to be painted
4 / 8
Painted pieces at the exit of the painting box
5 / 8
Main monitoring window of the supervision software for personal computer
6 / 8
Graphics window of the supervision software for personal computer
7 / 8
Window with the scheduled automatic starting times of heating for the ovens and the tanks
8 / 8
Italy
Category: Automation, Control of processes
Automated system for powder painting. The metallic items to be painted are transported by an aerial chain (speed: 1.3 to 2.4 metres per minute). The pre-treating tanks are provided with levels’ regulation system and temperatures’ regulation system. The system includes a tunnel-shape drying oven ( 140°C) and a polymerization oven (160°C to 210°C, residence time: at least 20 minutes).
Automatized transport robot carrying a pieces-holder frame
1 / 3
Three-dimensional drawing of whole automatized store
2 / 3
Main monitoring page of the supervision program for personal computer
3 / 3
Italy
Category: Automation, Control of processes
Automatized store for a chromium-plating system, with drying oven
Transport robots and treatment tanks
1 / 4
Transport robot with pieces-carrier frame
2 / 4
Transport conveyor and transfer device for loading/unloading
3 / 4
Supervision by computer
4 / 4
Italy
Category: Automation, Control of processes
Pre-treatment tunnel under manufacturing
1 / 5
Drying tunnel during manufacturing
2 / 5
Drying oven under manufacturing
3 / 5
Main monitoring page of the supervision software for computer
4 / 5
Graphs page of the software for working data analysis
5 / 5
Italy
Category: Automation, Control of processes
Automated powder painting system which is used for painting several kinds of metallic parts for external customers. The pre-treatment system is tunnel type, with spraying ramps. The transport system consists of an aerial mono-rail chain, with variable rate (1.0 to 3.5 metres/minute). The drying oven is linear chamber type, with working temperatures between 50°C and 110°C.
Transport chain with double rail and drying oven with linear chamber
1 / 6
Pre-treatment tunnel with spraying ramps
2 / 6
Transport chain with double rail and spraying painting chamber
3 / 6
Electrical panel-board for command and control
4 / 6
Supervision software: page with the schedule of automatic start of heating for of the system
5 / 6
Supervision software: main monitoring page which shows how whole system is working
6 / 6
Italy
Category: Automation, Control of processes
Automated powder painting system for metal office furniture
Pre-treatment tunnel
1 / 4
Transport chain, drying oven and inlet of the pre-treatment tunnel
2 / 4
Rendering of the whole system
3 / 4
Main monitoring page of the supervision program for personal computer
4 / 4
Italy
Category: Automation, Control of processes
Automated pre-treatment system for metallic plates before powder painting; the aerial transport chain and the drying oven are included
2024© - BRU.IMPIANTI Group S.r.l. - All rights are reserved.
Switch language: Italiano - English
